#10 Nylon Zipper Chain Set for Tarpaulin & Tent Work – 10 m / 32.81 ft + 10 Sliders ST-0013

Flexible zipper preparation for workshop-made closures

This #10 nylon zipper chain set provides 10 m / 32.81 ft of continuous zipper tape with 10 sliders. It is intended for work where a tarp, tent or textile enclosure requires a zipper prepared to its own finished opening rather than a pre-cut zipper in one fixed size.

Using zipper chain allows a workshop to prepare different closure lengths from the same roll. It is particularly useful when making multiple panels, replacing worn zipper runs or producing custom covers with varying measurements.

How to determine the correct zipper-chain length

Measure the functional opening where the two sides of the tarp or tent need to meet. Avoid measuring the entire outer edge unless that full edge is the true zipper path. Seam allowance, folded fabric, binding, reinforcement patches and any planned end treatment should be considered before making the final cut.

For work requiring additional tape length, the 20 m / 65.62 ft #10 nylon zipper chain set with 10 sliders is a suitable step up. Workshops with recurring production can also consider the 50 m / 164.04 ft #10 nylon zipper chain set with 25 sliders.

Slider and sewing checks before production

Before cutting a final production length, fit one of the included sliders onto a short sample section of zipper chain. This helps confirm slider travel, tape alignment and the working direction of the closure. A zipper may be the right length but still perform poorly when the tapes are sewn under unequal tension or when the opening twists during assembly.

• Check the zipper opening on a flat, untensioned panel.
• Run a slider across a test section before sewing the final piece.
• Keep the left and right zipper tapes aligned through the full seam line.
• Allow for layered fabric, edge binding and reinforcement areas.
• Use an end-finishing method suitable for the closure direction and final product design.

When to choose another zipper construction

This is a nylon zipper-chain solution. A project that specifically calls for molded zipper teeth, a different tooth profile or another fastening structure should be matched with the corresponding zipper family. The right choice depends on the design of the tarp, tent or cover, the expected use pattern and the specified construction details.

Custom zipper requests

For a custom zipper request, share the target length, zipper type, tape color, slider requirement, estimated quantity, intended textile application and any sample or reference. This information helps establish the most suitable zipper-chain and slider configuration.

Frequently Asked Questions

Is this a ready-length zipper?

No. This product is continuous zipper chain supplied in a 10 m / 32.81 ft set. It is cut to the required project length.

Are sliders included in the set?

Yes. The pack includes 10 sliders together with the #10 nylon zipper chain.

What zipper size is this?

This product should be specified as a #10 nylon zipper chain set.

Can this zipper chain be used for tent or tarp repair?

It can be considered when the original zipper line, tape profile, seam layout and intended use are compatible. Test a short section before completing the repair.

Does the zipper chain make a finished tarp waterproof?

No. This product is not described as waterproof or water-sealed. The weather resistance of a finished item depends on the fabric, seam construction, flaps, drainage design and overall workmanship.

Can I request another tape color or a different slider configuration?

Custom requests can be evaluated by sharing the requested tape color, zipper size, slider configuration, quantity and the intended application.