#9 Molded Plastic Zipper Chain Set for Tarpaulin & Tent Workshops – 10 m / 32.81 ft + 10 Sliders ST-0012

A molded zipper-chain set for project-specific closure lengths

This #9 molded plastic zipper chain set provides 10 m / 32.81 ft of continuous zipper tape together with 10 sliders. It is useful for tarp and tent workshops where a zipper needs to follow the actual working opening rather than a fixed ready-length measurement.

Continuous chain makes it possible to prepare different zipper lengths from the same set. This can be useful for tent doors, tarpaulin panels, outdoor covers and repair work where each closure has a different seam line or finished dimension.

Measure the working zipper route before cutting

Measure from the point where the zipper begins operating to the point where it needs to stop. Do not measure the complete outside perimeter of a tarp or tent unless that entire edge is the functional zipper route. Folded hems, binding, seam allowance, reinforced corners and planned end finishing can change the actual tape requirement.

For repair work, use the old zipper as a reference, not as an automatic final cutting measurement. Outdoor textile panels can stretch, shrink or shift over time. Laying the new zipper chain along the intended seam before cutting helps prevent an incorrect final length.

Why molded plastic zipper chain may be selected

This product uses a molded plastic zipper construction rather than nylon coil chain. The decision should be based on the intended zipper profile, the thickness of the textile assembly, the closure design and the required use pattern of the finished tarp, tent or cover.

It should not be selected only because of its length. The teeth, tape construction, slider match and sewing line should all be appropriate for the final product before production or replacement work begins.

Plan the 10 sliders before preparing finished closures

The set includes 10 sliders for the supplied #9 zipper chain. The number of finished closures depends on both the zipper length needed for each job and the number of sliders used in the design. Record each closure length, opening direction and slider requirement before cutting the chain.

For larger workshop plans, the #9 molded plastic zipper chain set with 20 m / 65.62 ft and 10 sliders provides a higher tape quantity. The 100 m / 328.08 ft set with 50 sliders is more suitable for recurring workshop production.

Checks before sewing the zipper chain

• Test one included slider on a short sample section before cutting the final length.
• Keep both zipper tapes aligned through the full sewing line.
• Allow for the thickness of the tarp, binding, folded hems and reinforcement layers.
• Confirm the opening direction before attaching the chain to the panel.
• Apply an end-finishing method that keeps the slider within the intended zipper route.

When another zipper construction may be more suitable

A molded plastic zipper chain may not be the correct choice when the project requires a nylon coil profile, TPU-coated tape or a smaller and lighter zipper system. Choose the product family based on the closure construction, not only on visible tooth size or the available tape length.

Custom zipper requests

For a custom zipper request, share the required chain length, zipper size, tape color, slider configuration, estimated quantity, intended textile application and any sample or reference. This helps establish the suitable zipper-chain and slider plan before ordering.

Frequently Asked Questions

Is this a finished zipper in one ready-made length?

No. It is continuous #9 molded plastic zipper chain supplied in a 10 m / 32.81 ft set and cut to the required project length.

Are sliders included?

Yes. The set includes 10 sliders with the zipper chain.

What zipper size is this?

This product should be listed as a #9 molded plastic zipper chain set.

Can it be used for a tent or tarp repair?

It can be considered when the existing zipper profile, seam layout and intended use are compatible. Test a short section before cutting the complete length.

Are end stops included?

The listed set content is zipper chain and sliders. The end-finishing method should be selected according to the construction of the final tarp, tent or cover.

Does this zipper chain make a tarp waterproof?

No. A zipper chain alone does not determine weather protection. The fabric, seams, flap design, drainage path and overall workmanship affect the finished item.