N5 / #5 Nylon Zipper Chain Set for Bag, Case & Workshop Production – 200 m / 656.17 ft + 100 Sliders ST-0009T10-200M100C

Continuous #5 zipper chain for repeated bag and case production

This N5 / #5 nylon zipper chain set provides 200 m / 656.17 ft of continuous zipper tape together with 100 sliders. It is intended for workshops making bags, cases, storage covers, organizers and similar textile products in multiple sizes.

Instead of stocking many ready-length zippers, the workshop can prepare the required zipper length from continuous chain. This is useful when one production schedule includes products with different opening widths, curved zipper lines or varying pocket and compartment dimensions.

Measure the usable zipper route before cutting

Measure from the point where the zipper begins to operate to the point where it needs to stop. Do not use the full outside perimeter of the bag or case unless that entire edge is the actual zipper route. Seam allowance, binding, lining, gusset depth, zipper garages and reinforcement panels can all change the final tape requirement.

For repairs or replacement work, the old zipper should be treated as a reference rather than an automatic final measurement. Bag materials, linings and construction layers may change shape through use, so a trial layout before cutting can prevent wasted tape.

Plan 100 sliders together with the cut list

The 100 supplied sliders support a high number of zipper runs, but the total number of finished products depends on the zipper length and slider configuration used in every design. A single-slider pouch, a double-slider equipment case and a long organizer opening consume slider stock differently.

Create a simple production list before cutting. Record the product name, zipper length, zipper direction, quantity and slider count for each item. This gives the workshop better control over both tape use and slider allocation throughout the production run.

Checks before sewing the chain into a product

• Test one supplied slider on a short section of zipper chain before cutting the final length.
• Keep both sides of the zipper tape parallel during sewing.
• Allow for bag lining, edge binding, gusset thickness and reinforced zones.
• Confirm the opening direction before installing the tape.
• Finish the zipper ends in a way that keeps the slider within the intended zipper route.

When should another zipper type be selected?

This product is a #5 nylon zipper chain system. It may not be the right choice when a project needs a much smaller zipper profile, a molded plastic tooth structure, a water-resistant TPU-coated tape or a specific ready-made zipper end construction.

Selection should be based on the product structure, zipper channel width, expected use, fabric thickness and slider requirement rather than length alone.

Choose the appropriate set volume

The 200 m / 656.17 ft set is intended for high-volume or ongoing workshop use. For smaller production plans, the 100 m / 328.08 ft #5 zipper chain set with 50 sliders and the 50 m / 164.04 ft zipper chain set with 25 sliders can be more appropriate.

Workshops that want to buy zipper tape and sliders separately can also consider the #5 nylon zipper tape product.

Custom zipper requests

For a custom zipper request, share the target chain length, zipper size, tape color, slider requirement, estimated quantity, intended product type and any sample or reference. This helps establish the right zipper-chain and slider configuration before production.

Frequently Asked Questions

Is this a finished zipper in one fixed length?

No. It is continuous N5 / #5 nylon zipper chain supplied in a 200 m / 656.17 ft set and cut according to the final product requirement.

Are 100 sliders included?

Yes. The set includes 100 sliders with the continuous zipper tape.

What zipper size is this?

This product should be listed in English as an N5 / #5 nylon zipper chain set.

Can it be used for bags and equipment cases?

It can be suitable for bags, cases, organizers and covers when the zipper size, tape construction and slider configuration match the product design.

Are end stops included?

The listed set content is zipper chain and sliders. The correct end-finishing method should be selected according to the finished bag, case or cover construction.

Does this zipper chain make a bag waterproof?

No. This product is not described as waterproof or water-sealed. Water protection of a finished product depends on the shell material, seams, lining, zipper coverage and complete construction.