N5 / #5 Nylon Zipper Chain Set for Bags & Cases – 50 m / 164.04 ft + 25 Sliders ST-0009T10-50M25C

For bag and case workshops with repeat production

This N5 / #5 nylon zipper chain set provides 50 m / 164.04 ft of continuous zipper tape together with 25 sliders. It is suited to workshops producing bags, cases, organizers, textile covers and similar products in more than one size.

Using zipper chain gives a workshop flexibility that ready-length zippers cannot always provide. The required zipper length can be prepared during cutting, based on the finished opening of each bag or case rather than the nearest standard zipper length available in stock.

Measure the actual zipper route before cutting

Measure from the point where the zipper starts operating to the point where it needs to stop. The outside perimeter of a bag or case may be longer than the working zipper line. Gussets, lining, seam allowance, binding tape, curved corners and zipper guards can all affect the final chain length.

For repair work, use the old zipper as a guide rather than an automatic cutting measurement. A bag may have stretched panels, shifted lining or a previously altered zipper path. Test-fitting the new chain before cutting reduces the risk of wasting tape.

Plan the 25 supplied sliders with the production list

The number of finished zippers that can be prepared from this set depends on both zipper length and slider configuration. A small pouch may use one slider, while a long equipment case or organizer can require more than one operating point.

Create a cut list before production. For each product, record the zipper length, quantity, opening direction and required slider count. This lets the workshop manage its 50 m / 164.04 ft tape supply and 25-slider allocation together.

Checks before sewing zipper chain into a bag or case

• Run one included slider over a short sample before cutting the final length.
• Keep both sides of the zipper tape parallel while sewing.
• Allow for lining thickness, edge binding, gusset depth and reinforced areas.
• Confirm the intended opening direction before installing the zipper.
• Finish both ends so the slider remains inside the intended zipper route.

When should you choose a different zipper construction?

This is an N5 / #5 nylon zipper chain system. It may not be appropriate where a product requires a smaller zipper profile, molded plastic teeth, metal teeth, a TPU-coated water-resistant tape or a ready-made zipper with a specific end construction.

The correct choice depends on zipper channel width, fabric thickness, expected load, opening frequency and the finished look of the product. Choosing only by length can lead to an unsuitable zipper structure.

Build your zipper stock around production volume

This 50 m / 164.04 ft set suits regular but moderate production. Workshops with a larger cutting schedule can use the N5 / #5 zipper chain set with 100 m / 328.08 ft and 50 sliders as the next stock level.

For higher-volume workshop supply, the N5 / #5 zipper chain set with 200 m / 656.17 ft and 100 sliders supports a larger production plan. Workshops that stock tape and sliders separately can also review the N5 / #5 nylon zipper tape.

Custom zipper requests

For a custom zipper request, share the target chain length, tape color, slider requirement, estimated quantity, intended product type and any sample or reference. This information helps determine the right zipper-chain and slider configuration before production.

Frequently Asked Questions

Is this a finished zipper in one standard length?

No. It is continuous N5 / #5 zipper chain supplied in a 50 m / 164.04 ft set. The workshop cuts each zipper length to suit the final product.

Are sliders included with the tape?

Yes. The set includes 25 sliders with the continuous nylon zipper chain.

Can this set be used for bag and case production?

Yes, when the zipper size, zipper channel and expected use of the bag or case are compatible with an N5 / #5 nylon zipper construction.

Can I use it for zipper replacement work?

It can be considered for replacement work when the original zipper profile, sewing construction and slider arrangement are compatible. Test a short sample before cutting the full length.

Are end stops included?

The listed pack content is zipper chain and sliders. The appropriate end-finishing method should be planned for the specific product construction.

Will this make a bag waterproof?

No. This product is not described as a waterproof or water-sealed zipper. Finished water protection depends on the shell fabric, seams, zipper coverage, lining and overall construction.