20 m / 65.62 ft #10 Nylon Zipper Chain Set for Tarpaulin & Tent Workshops – 10 Sliders ST-0013T20-20M10C

Continuous #10 zipper chain for workshop-made closures

This set contains 20 m / 65.62 ft of #10 nylon zipper chain together with 10 sliders. It is suited to tarpaulin, tent and cover work where one finished zipper length does not fit every job. The zipper chain can be cut according to the actual opening and prepared around the construction of the final textile product.

Using continuous chain helps a workshop avoid keeping many ready-length zippers in stock. The correct zipper length is created during the cutting and sewing stage, which is especially useful when tent openings, tarp panels or covers vary from one project to another.

Measure the functional zipper line before cutting

Measure from the point where the zipper begins to work to the point where it must stop. The outer edge of a tarp or tent panel may be longer than the actual zipper path. Folded edges, seam allowance, binding tape, reinforced corners and planned end finishing all affect the final chain requirement.

For comparison with other continuous zipper constructions, use the zipper tape collection. For product options selected around tarp and tent use, the tarpaulins and tents category is also relevant.

Plan the 10 supplied sliders with the cut list

The set includes 10 sliders for the #10 zipper chain. Before cutting, record each required closure length, opening direction and slider count. A closure using one slider and a closure using two sliders consume the same chain differently, so both tape length and slider quantity need to be planned together.

For workshops that prefer to hold tape and sliders as separate stock items, the #10 nylon zipper chain for tarpaulin and tent work can be considered as a tape-only option.

Checks before sewing a finished zipper run

• Test one included slider on a short sample before cutting the final length.
• Keep both sides of the zipper tape parallel throughout the sewing line.
• Allow for canvas thickness, binding, folded hems and reinforcement layers.
• Confirm the opening direction before attaching the zipper chain.
• Choose an end-finishing method that retains the slider within the intended zipper route.

When another zipper construction may be needed

This product is a #10 nylon zipper-chain system. When a project specifically requires molded zipper teeth, coated tape or another zipper construction, select the appropriate product family rather than choosing by length alone. The tooth structure, tape build and intended use should be checked together.

Custom zipper requests

For a custom zipper request, share the required chain length, zipper size, tape color, slider configuration, estimated quantity, intended textile application and any sample or reference. These details help establish the right zipper-chain and slider plan.

Frequently Asked Questions

Is this a finished zipper in one fixed length?

No. It is continuous #10 nylon zipper chain supplied in a 20 m / 65.62 ft set and cut to the required project length.

Are sliders included?

Yes. The set includes 10 sliders with the zipper chain.

What zipper size is this product?

This product should be listed as a #10 nylon zipper chain set.

Can it be used for tarp or tent repair?

It can be considered when the existing zipper profile, sewing layout and replacement requirement are compatible. Test a short section before completing the repair.

Are end stops included?

The stated pack content is zipper chain and sliders. The end-finishing method should be planned according to the final tarp, tent or cover construction.

Does this zipper chain make a tarp waterproof?

No. The zipper chain alone does not determine water protection. Finished performance depends on the fabric, seam construction, flap design, drainage and overall workmanship.