N5 / #5 Nylon Zipper Chain Workshop Set – 50 m / 164.04 ft + 25 Single-Pull Sliders ST-T10T-NAYLON-50M25C

A practical #5 zipper-chain set for regular workshop work

This N5 / #5 nylon zipper chain workshop set provides 50 m / 164.04 ft of continuous zipper tape and 25 single-pull sliders. It is designed for makers who need more flexibility than ready-length zippers can offer while keeping their stock at a manageable level.

It can be used in bag, case, organizer, pouch, textile-cover and similar projects where the zipper route varies from one product to another. Instead of choosing the nearest standard zipper length, the workshop can prepare each zipper run around the real opening of the finished item.

Measure the working zipper path before cutting

Measure from the point where the zipper begins operating to the point where it needs to stop. The full outer edge of a bag or case may be longer than the actual zipper route. Gussets, lining thickness, seam allowance, edge binding, corner turns, zipper guards and end finishing all affect the required tape length.

For repair work, treat the removed zipper as a reference rather than an automatic cutting template. Fabric, lining and reinforcement layers can change shape through use. Test-fitting the new zipper chain along the planned seam helps prevent avoidable tape loss.

Why single-pull sliders are included

The included sliders have one pull tab positioned on one side of the slider body. This configuration is useful for bag openings, case lids, organizer pockets and textile pouches normally operated from one main exterior face.

Single pull describes the pull-tab arrangement, not a one-way zipper movement. A closure that needs convenient access from both sides may require another slider configuration. Choose the slider style around the way the completed product will be opened and handled.

Plan tape and slider usage together

The 50 m / 164.04 ft tape quantity and 25 supplied sliders should be planned together. A small pouch may use one slider, while a larger case, long organizer compartment or two-access closure can require a different slider allocation.

Before cutting, prepare a simple production list showing each item, its zipper length, quantity, opening direction and slider requirement. This gives the workshop a clearer view of material consumption across several product models.

Checks before sewing the zipper chain

• Test one slider on a short section of the supplied chain before cutting final lengths.
• Keep both sides of the zipper tape straight and parallel during sewing.
• Allow enough clearance around lining, binding, gussets and reinforcement layers.
• Confirm the opening direction before attaching the zipper chain to the product.
• Finish both ends so the slider cannot leave the intended zipper route.

When to select another zipper setup

This product is an N5 / #5 nylon zipper-chain set. It may not be the right choice when a project requires a smaller zipper profile, molded plastic teeth, metal teeth, TPU-coated zipper tape or a finished zipper with a specific ready-made end construction.

Select the zipper according to the product’s zipper channel, material thickness, opening frequency, load expectation and intended appearance rather than length alone.

Moving from sample work to production stock

This 50 m / 164.04 ft set is suited to repeat small-batch work and moderate workshop production. A larger zipper-chain supply may be more practical once the zipper route, tape color, slider layout and sewing method have been confirmed for recurring production.

To compare the wider product range, connect this content naturally to the published Zipper Types page.

Custom zipper requests

For a custom zipper request, share the required chain length, zipper size, tape color, pull-tab configuration, estimated quantity, intended product type and any sample or reference. These details help determine the appropriate chain-and-slider arrangement before production.

Frequently Asked Questions

Is this a ready-made zipper in one fixed length?

No. This is continuous N5 / #5 nylon zipper chain. Each zipper run is cut to suit the finished product.

Are sliders included?

Yes. The set includes 25 single-pull sliders with 50 m / 164.04 ft of zipper chain.

What does single pull mean?

It means the slider has one pull tab on one side of its body. It does not mean the zipper works in only one direction.

Can it be used for bags and cases?

It can be suitable when the zipper channel, material thickness, product structure and expected use are compatible with an N5 / #5 nylon zipper system.

Are end stops included?

The set includes continuous zipper chain and sliders. The correct end finish should be selected according to the finished product design.

Will this zipper chain make a bag waterproof?

No. This is standard nylon zipper chain. Water protection depends on the shell material, seams, zipper coverage, lining and overall product construction.