N5 / #5 Nylon Zipper Chain Workshop Set – 100 m / 328.03 ft + 50 Single-Pull Sliders ST-T10T-NAYLON-100M50C

For workshops making bags and cases in more than one size

This N5 / #5 nylon zipper chain workshop set provides 100 m / 328.08 ft of continuous zipper tape together with 50 single-pull sliders. It is intended for workshops producing bags, cases, organizers, pouches, storage covers and similar sewn products with different zipper requirements.

Continuous zipper chain gives a workshop more flexibility than ready-length zippers. Instead of selecting the nearest standard size, the maker can prepare the zipper around the actual opening of the finished item. This is particularly useful when the zipper route changes between product models or includes gussets, curved corners, binding or reinforced sections.

Measure the functional zipper path before cutting

Measure from the point where the zipper begins operating to the point where it needs to stop. The full outer perimeter of a bag or case may be longer than the working zipper path. Seam allowance, lining thickness, gusset depth, zipper guards, edge binding, corner turns and end finishing can all affect the final chain requirement.

For repair work, use the removed zipper as a reference rather than an automatic cutting template. Materials can stretch, lining can shift and previous repairs may have changed the original zipper path. A short trial fit before cutting helps reduce avoidable tape loss.

Why the set includes single-pull sliders

The supplied sliders use a single-pull configuration. One pull tab is positioned on one side of the slider body, which makes this setup suitable for closures normally opened from one main exterior surface, such as bag tops, case lids, organizer pockets and textile pouches.

Single pull describes the pull-tab arrangement, not a one-direction zipper movement. Projects that need convenient access from both sides can require a different slider construction. Select the slider type according to the way the finished product will be opened, carried and used.

Plan tape use and slider allocation together

The 100 m / 328.08 ft zipper-chain quantity and 50 sliders should be planned as one production system. A small pouch can use one slider, while a long organizer compartment, equipment case or multi-access closure can require a different slider allocation.

Before cutting, create a production list with each item’s zipper length, planned quantity, opening direction and required slider count. This helps manage material consumption across several product models and makes it easier to decide when separate chain or slider stock is needed.

Before sewing the zipper chain

• Test one supplied slider on a short sample of the zipper chain before cutting final lengths.
• Keep both zipper tapes parallel and evenly aligned during sewing.
• Allow enough clearance for lining, binding, gussets and reinforcement layers.
• Confirm the opening direction before attaching the zipper chain to the product.
• Finish both zipper ends so the slider remains within the intended zipper route.

When another zipper construction may be needed

This is an N5 / #5 nylon zipper-chain system. It may not be appropriate when a project requires a smaller zipper profile, molded plastic teeth, metal teeth, TPU-coated zipper tape or a finished zipper with a defined end construction.

The correct zipper should be selected according to the zipper-channel width, material thickness, expected opening frequency, product load and intended use. A zipper that appears similar in size may still be unsuitable when its chain profile or slider configuration does not match the product.

Custom zipper requests

For a custom zipper request, provide the required chain length, zipper size, tape color, pull-tab configuration, expected quantity, intended product type and any reference sample. These details help determine the right chain-and-slider arrangement for the final product.

Frequently Asked Questions

Is this a ready-made zipper in one fixed length?

No. This is continuous N5 / #5 nylon zipper chain. Each zipper run is cut to suit the finished product.

Are sliders included?

Yes. The set includes 50 single-pull sliders with 100 m / 328.08 ft of zipper chain.

What does single pull mean?

It means the slider has one pull tab on one side of its body. It does not mean the zipper works in only one direction.

Can it be used for bags and cases?

It can be suitable when the zipper channel, product structure, material thickness and expected use are compatible with an N5 / #5 nylon zipper system.

Are finished end stops included?

The listed pack contents are zipper chain and sliders. The end-finishing method should be planned according to the final bag, case or cover construction.

Can I buy zipper tape separately for future production?

Yes. Workshops that want to plan chain and sliders independently can consider the compatible N5 / #5 nylon zipper tape.