N3 / #3 Nylon Zipper Chain Set for Cushion & Pillow Cover Workshops – 100 m / 328.08 ft + 200 Single-Pull Sliders ST-T5T-NAYLON-100M200K

For cushion-cover production that needs flexible zipper lengths

Throw pillow covers, cushion covers and removable pillow covers are rarely made in just one size. Piping, seam allowance, back-panel openings, lining, envelope flaps and decorative construction can all change the usable zipper path.

This N3 / #3 nylon zipper chain set gives workshops 100 m / 328.08 ft of continuous zipper tape and 200 single-pull sliders. It is designed for repeat home-textile production where makers need to prepare zipper lengths around the actual opening of each finished cover rather than relying on the nearest ready-made zipper size.

Why a 100-meter zipper-chain set supports repeat production

This quantity is suitable for workshops producing multiple cushion, throw pillow and pillow-cover styles over time. It can help simplify stock planning when one collection includes several cover dimensions, different opening positions or frequent made-to-order work.

The 200 included single-pull sliders should be planned together with the tape supply. A cover may use one slider, but the final number of completed zipper runs depends on each opening length, the selected zipper direction and the end-finishing method used in the final cover.

Measure the functional zipper opening before cutting

Measure from where the zipper begins operating to where it needs to stop. Do not measure the entire perimeter of the cover unless that full edge is the actual working zipper route.

Include seam allowance, piping, lining bulk, fabric thickness, zipper flaps, corner turns and the final end finish in the measurement. Before cutting a full production batch, lay the chain along the intended seam and test one slider on a short sample section.

Single-pull sliders for one main access side

The supplied sliders use a single-pull layout, with one pull tab on one side of the slider body. This can work well for throw pillow and cushion covers that are normally opened from a rear panel or one main exterior face.

Single pull describes the pull-tab configuration, not the direction of zipper travel. A cover that must be opened comfortably from both faces may need another slider arrangement. Select the slider style around the real handling position of the finished cover.

Check chain-and-slider fit before sewing a full batch

N3 / #3 identifies the intended zipper size for this chain-and-slider system. Before preparing multiple cover zippers, test one included slider on a short section of the exact chain.

The slider should move smoothly, close both sides evenly and leave no visible opening behind it. Avoid mixing components simply because they look similar: chain profile, coil shape and slider channel can differ between zipper systems.

Choose the zipper construction around the cover design

This is a standard N3 / #3 nylon zipper-chain system. Where the closure needs to disappear completely into a seam, an invisible zipper may be a better design choice. Heavier covers, thicker fabrics or wider zipper channels can also require another zipper construction.

Choose the zipper according to fabric thickness, cover structure, opening position and expected handling—not only according to visible zipper size.

Custom zipper-set requests

For a custom zipper-set request, share the required chain length, tape color, slider arrangement, estimated quantity and a cushion-cover sample or drawing. These details help match the zipper system to your final home-textile product. Contact us with your project details to evaluate a custom set configuration.

Frequently Asked Questions

Is this a finished zipper with ready-to-sew ends?

No. This is continuous N3 / #3 zipper chain. The final zipper length, slider installation and end finish are prepared by the workshop or maker.

Are 200 sliders included?

Yes. The intended pack contents are 200 single-pull sliders with 100 m / 328.08 ft of nylon zipper chain.

Can I cut the chain for different pillow-cover sizes?

Yes. The chain is designed to be cut around the actual working opening of each pillow or cushion cover.

What does single pull mean?

It means the slider has one pull tab on one side of its body. It does not mean the zipper moves in only one direction.

Can this set be used for cushion-cover repairs?

It can be suitable when the existing zipper profile, sewing construction and required opening are compatible with an N3 / #3 nylon zipper system.

Does the set include end stops?

The listed contents are zipper chain and sliders. Choose the end-finishing method based on the final cushion or pillow-cover construction.