N3 / #3 Nylon Zipper Chain Production Set for Pillow & Cushion Cover Workshops – 200 m / 656.17 ft + 400 Single-Pull Sliders ST-T5T-NAYLON-200M400K

Production-level zipper chain for custom cushion-cover lengths

Throw pillow covers, cushion covers and removable pillow covers are often made in different sizes, fabrics and closure styles. Piping, seam allowance, back-panel openings, lining, overlap construction and decorative details can all change the usable zipper path.

This N3 / #3 nylon zipper chain production set provides 200 m / 656.17 ft of continuous zipper tape and 400 single-pull sliders. It is designed for workshops producing repeated cover styles in multiple dimensions, where a ready-made zipper length may not match the real opening of each finished item.

Why a 200-meter zipper-chain set supports regular production

This quantity is suitable for home-textile workshops, upholstery businesses, sewing studios and makers producing multiple cushion, throw pillow or pillow-cover styles over time. Instead of carrying many separate ready-made zipper lengths, the workshop can prepare each zipper around the actual cover opening.

The included 400 sliders should be planned together with the zipper-chain supply. The number of completed covers depends on each opening length, the slider arrangement selected for the cover and the end-finishing method used after installation.

Measure the working zipper path before cutting

Measure from where the zipper begins operating to where it needs to stop. Do not use the full outside perimeter of a cover unless that complete edge is truly the working zipper route.

Include seam allowance, piping, lining bulk, fabric thickness, zipper flaps, corner turns and the final end finish in the measurement. Before cutting a full batch, lay the zipper chain along the intended seam and test one slider on a short sample section.

Single-pull sliders for one main access side

The supplied sliders use a single-pull layout, with one pull tab on one side of the slider body. This is suitable for pillow and cushion covers normally opened from a rear panel or one main exterior face.

Single pull describes the pull-tab configuration, not the direction of zipper travel. A cover that must be opened comfortably from both faces may need another slider arrangement. Select the slider style around the real handling position of the finished cover.

Check chain-and-slider fit before batch sewing

N3 / #3 identifies the intended zipper size for this chain-and-slider system. Before preparing multiple cover zippers, test one supplied slider on a short section of the exact chain.

The slider should move smoothly, close both tape sides evenly and leave no visible opening behind it. Similar-looking zipper components can still have different coil profiles, tape construction or slider channels, so a short compatibility test helps reduce avoidable rework.

Choose the zipper construction around the textile design

This is a standard N3 / #3 nylon zipper-chain system. Where the closure needs to disappear fully into a seam, an invisible zipper may be a better design choice. Heavier covers, thicker fabrics or wider zipper channels can also require a different zipper construction.

Choose the zipper according to fabric thickness, cover structure, opening position and expected handling—not only according to visible zipper size.

Custom zipper-set requests

For a custom zipper-set request, share the required chain length, tape color, slider configuration, estimated quantity and a sample or drawing of the final cover. These details help evaluate the appropriate chain-and-slider arrangement for your production project.

Frequently Asked Questions

Is this a finished zipper with ready-to-sew ends?

No. This is continuous N3 / #3 zipper chain. The final zipper length, slider installation and end finish are prepared by the workshop or maker.

Are 400 sliders included?

Yes. The set includes 400 single-pull sliders with 200 m / 656.17 ft of nylon zipper chain.

Can I cut the chain for different pillow-cover sizes?

Yes. The chain is designed to be cut around the actual working opening of each pillow or cushion cover.

What does single pull mean?

It means the slider has one pull tab on one side of its body. It does not mean the zipper moves in only one direction.

Can this set be used for cushion-cover repairs?

It can be suitable when the existing zipper profile, sewing construction and required opening are compatible with an N3 / #3 nylon zipper system.

Does the set include end stops?

The listed contents are zipper chain and sliders. Select the end-finishing method according to the final cushion or pillow-cover construction.